S10 V8 - Last "test fit"

Here is my last "test fit" to check how everything will come together for the final installation. Be prepared to do this a few times as it will help you determine how everything will fit.

I decided to put on the bellhousing to check clearances with the firewall and fuel lines. After doing this I decided that I would remove then and install my fuel pressure regulator next to my fuel filter. The only lines I will run up are the main feed and th vent line.

Getting closer....

Here it is in the bay... everything went well...

At this point I also made sure to take some measurements in regards to the radiator support and where the radiator will sit.